Semi-Custom Kitchen Cabinets in Johns Creek, GA
Inspect the measured layout and selected products in the actual Johns Creek property before choosing the semi-custom kitchen cabinets scope; neighboring homes do not establish the condition or layout here. Homeowners often assume a second island means custom cabinetry, but a well-designed semi-custom line can deliver both islands with matching finish, precise joinery, and the same lead time as a single island. Johns Creek Cabinet Design specializes in this exact configuration.
- Itemized written quotes
- Measured before ordering
- Semi-custom to full custom
Request a written quote
Or call (562) 203-3232. Calls only, we do not receive text messages.
About our semi-custom kitchen cabinets
The key is not just selecting a catalog line, but knowing how to configure it. A second island built from semi-custom components avoids the cost and wait of custom work while maintaining visual harmony across the entire kitchen. Call today to schedule a design visit and see how your two-island plan fits within a semi-custom framework.
Why Johns Creek Cabinet Design
How We Work
One conversation in your home, one measure, one written quote, then an install date.
Building a second island from the catalog
A second island in a semi-custom kitchen is not a custom fabrication. It is two back-to-back base cabinet runs, connected by a finished back panel that matches the face frames and door style. Many semi-custom lines include this configuration as a standard catalog option, often listed as a tandem base or double base unit. The panel is built to the same thickness and finish as the rest of the kitchen, so it reads as part of the cabinetry, not an afterthought. This eliminates the mismatched look that comes from adding a separate structure or modifying a single island after order.
What makes this possible is the depth and width flexibility built into semi-custom lines. When planning building a second island from the catalog for semi-custom kitchen cabinets in Johns Creek, use the actual appliance dimensions, room measurements and selected product instructions to resolve this detail rather than relying on an unsupported standard size or timetable. A 30-inch deep base can be ordered as a single unit or split into two 15-inch sections with a shared center panel. This allows the island to function as both a work zone and a seating area without sacrificing drawer access or structural integrity.
Depth modifications for a working island
A 30-inch deep island built from semi-custom components allows full-depth drawer banks on one side and a seating area on the other. This is achieved by selecting a base cabinet with undermount drawer slides that support the full 30-inch depth, paired with a standard 24-inch deep cabinet on the opposite side for appliance storage or trash pull-outs. When evaluating depth modifications for a working island, request the specific Johns Creek project product sheet and check its stated limitations against drawer loads; the material or finish name alone is not proof of performance.
For semi-custom kitchen cabinets in Johns Creek, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in depth modifications for a working island and request the applicable product documentation before accepting a performance or price comparison. Check how the selected assembly is rated for countertop support, island access in the Johns Creek room, including the stated care and installation requirements, rather than assuming a universal material advantage. The drawer fronts are full overlay, matching the door style, and the internal frame is reinforced to prevent sagging under load. This is not a modification made after the fact; it is a catalog option selected during design.
One common mistake is assuming a deeper island requires custom cabinetry. In reality, most semi-custom manufacturers offer 30-inch depths as a standard upgrade, often with no additional cost beyond the base unit. The difference is in how the design is configured, not in the cabinet line itself.
One line, one finish batch
Two islands and a perimeter must come from the same production batch and the same finish run. If the islands are ordered separately or from different lines, even slight variations in stain tone or paint hue will be visible under the same pendant lights. This is not a minor detail, it is a visual fault that becomes more obvious over time.
Semi-custom manufacturers produce cabinetry in batches, and each batch is stained or painted under controlled conditions. When you order all components for a two-island kitchen from the same line, the factory ensures the wood grain, pigment saturation, and sheen are identical across all boxes. This includes the back panels, toe kicks, and crown molding. A custom shop may offer the same, but at a higher cost and longer lead time.
During the design visit, the exact batch number and finish code are recorded and confirmed with the factory before the order is placed. This prevents color drift between the perimeter cabinets and the islands. It also ensures that any future touch-ups or replacements will match exactly. This level of control is standard in semi-custom production and is not available with stock or RTA lines.
Semi-custom cost for a two-island kitchen
For semi-custom kitchen cabinets in Johns Creek, request an itemized written quote for the selected semi-custom line and its available modifications, with installation and any related trade work identified separately. The total cost depends on the number of base and wall cabinets, the door style, the wood species or painted finish, and the interior accessories. Compare proposals for appliance openings, island access, storage dimensions using the actual Johns Creek room measurements and the same agreed inclusions, rather than a generic price allowance.
Price drivers include the door style: a slab door is less expensive than a raised panel or inset. For semi-custom kitchen cabinets in Johns Creek, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in semi-custom cost for a two-island kitchen and request the applicable product documentation before accepting a performance or price comparison. Soft-close hinges and undermount drawer slides are standard on semi-custom lines and are included in the per-foot price. Glass door inserts, light rail, and crown molding add to the total but are optional.
Tearing out existing cabinetry, hauling debris off site, patching the walls between both island positions, and templating the countertop across two runs are each scoped and priced as their own line items. Check how the selected assembly is rated for countertop support, island access in the Johns Creek room, including the stated care and installation requirements, rather than assuming a universal material advantage; review this point in the semi-custom cost for a two-island kitchen discussion. Every per-foot figure above is a typical installed estimate for a two-island semi-custom project in Johns Creek, GA, subject to change, and the written quote issued after your design visit sets the final price.
The process
From first call to installed cabinets
Four steps, and you make a decision at the end of each one before the next begins.
Call or send the form
We call back, talk through the room and what you want from it, and set a time to visit.
Measure and design
A field measure, then a layout with door style, finish and hardware you can see before you commit.
Written quote and order
An itemized quote with the lead time on it. Cabinets are ordered against the measured drawing once you sign.
Delivery and install
Boxes are checked on arrival, set level and scribed to the walls, doors adjusted, then a walk-through with you.
More of What We Build
Service area
Where We Work
Questions
Semi-Custom Kitchen Cabinets: Common Questions
Can a second island be built from a semi-custom catalog, or does it require custom work?
Yes, a second island can be built from a semi-custom catalog. It is configured as two back-to-back base runs with a finished back panel, which many lines offer as a standard option. This avoids the cost and lead time of custom fabrication while maintaining structural integrity and visual consistency.
Why does the island depth matter for drawer access?
A 30-inch deep island allows full-depth drawer banks on one side without compromising the seating area on the other. Semi-custom lines support this with heavy-duty undermount slides rated for full-depth loads. A 24-inch deep island limits drawer depth and reduces usable storage space.
How do you ensure both islands match the perimeter cabinets in color?
All components for the kitchen, including both islands and the perimeter, are ordered from the same production batch and finish run. The factory ensures consistent stain tone and sheen across every box. The batch number and finish code are confirmed before order to prevent visual mismatch under lighting.
Is plywood box construction necessary for a two-island kitchen?
Yes. The box and fastening specification is confirmed against the manufacturer's published moisture and loading ratings, so the boxes suit a heavy quartz countertop in Johns Creek. For semi-custom kitchen cabinets in Johns Creek, ask how the proposed box or door substrate, finish and edge details suit the actual conditions described in is plywood box construction necessary for a two-island kitchen and request the applicable product documentation before accepting a performance or price comparison.
What is the lead time for semi-custom cabinets with two islands?
For semi-custom kitchen cabinets in Johns Creek, agree the actual measurements and product requirements for delivery access before committing to the layout or schedule. This includes the time to produce the full run, including both islands and perimeter cabinets, from one batch. Discuss what is the lead time for semi-custom cabinets with two islands using the Johns Creek site dimensions, available products and related work; request a current schedule after those decisions are confirmed.
Does adding two islands increase the installation time?
Installation time increases slightly, but not dramatically. A two-island kitchen with a full perimeter typically takes three to four days, similar to a large single-island kitchen. The complexity is in the layout planning, not the install process.
Can you reface existing cabinets if I want to add a second island?
No. Refacing only replaces doors and drawer fronts over existing boxes. Adding a second island requires new base cabinets, structural changes, and new countertop integration. A full replacement is necessary in this case.
What does the written quote include for a two-island kitchen?
The written quote itemizes every base, wall, and tall cabinet by size and type, including the island components. It lists door style, wood species or finish, box material, hardware, interior accessories, and separate line items for demolition, disposal, and countertop work.
Talk to us about semi-custom kitchen cabinets
Tell us about the room, in Johns Creek or anywhere in the service area, and we call back to set up a visit.
Calls only, we do not receive text messages.